40v share volt hydroshot portable power cleaner (discontinued)

JavaScript seems to be disabled in the browser.
To take advantage of the functionality of this site, you have to enable JavaScript in your browser.
There are no items in your shopping cart.
* Normal price: $176.
81 special price $149
Normal Price: $99.
99 special $79.
Regular Price: $349.
$279 special 99
Regular Price: $159.
$139 special.
Normal Price: $89.
99 special $74.
97 limited time Network free delivery only! First-of-its-
Friendly, lightweight, portable power cleaner draws maximum efficiency from any fresh water source while minimizing water use only. 5gpm.
The gentle spray setting allows you to water plants and flowers quickly and easily, perfect for use at home, camp, Marina, pool, lake or anywhere with fresh water. Versatile 5-xadin-
The 1 pressure nozzle allows you to switch from the intensity of the water flow to varying degrees. (
0, 15, 25, 40, watering)
Normal Price: $139.
$129 special 99
99 yes, this model includes 1 battery and 1 charger.
WORX\'s Hydroshot Superlightweight.
Even with the battery and gun installed, it weighs only 4 lbs. 2 lbs.
This is the ultimate portable power cleaner for use at home or when out, easy to store.
WORX Hydroshot has custom made
Designed accessories can be used in a variety of applications from cleaning to watering.
After-sales pressure washer accessories can also be used for hydraulic lenses, but since the flow rate is much lower than the typical pressure washer, it may not work as originally designed.
The Hydroshot attachment is designed for Hydroshot only and cannot be used for other pressure washing equipment.
Hydroshot is designed for fresh water sources and uses chemicals, detergents, brine or any other non-
The source of fresh water in it will void the warranty.
For tough cleaning needs, soap dispenser accessories can be used to mix any post
Market cleaning solution or liquid soap.
When using fresh water from a pool, lake, river or pond, slide the float along the hose to keep the water inlet away from the bottom and avoid picking up dirt or mud.
After completion, rinse the tool with normal tap water to ensure its life and performance.
Yes, as long as the water is 104 degrees or less.
WORX Hydroshot has two different speed settings of high and low to suit the task at hand and provides more than 5 times the pressure of the garden hose and nozzle.
Press the button at the top of the handle to change the pressure setting.
High speed can withstand greater pressure, it is better to use the extension gun and the power nozzle for cleaning.
Low speed helps save battery running time, it is better to water the battery with a shower device on the lengthened gun and power nozzle.
The water pressure will depend on the speed setting used, but can vary from 94 psi to 335 psi.
Since the pressure may vary depending on the water gun setting, there are several things to check :-
Install a short and long gun on the water gun.
This combination will help to increase the pressure on the water output. -
Set the pressure setting switch to high. -
Confirm that the water source hose has not been compressed or distorted and is not subject to any restrictions. -
If the attached hose is used, make sure the intake filter floats under the water without touching the bottom, any dirt or debris that may prevent the water from entering the hose.
If it is firmly attached and the equipment does not draw water from your water source, try to connect the home garden hose directly to the machine.
If it works with a direct home connection, rinse the machine for at least 1 minute and reconnect the 20ft provided.
Hose and try to draw water from your water source again. (
This is also a useful step when taking the machine out of storage. )-
Unscrew the orange hose adapter from the machine (
This may require an adjustable wrench).
Verify that the rubber gasket filter is still in place and see if there is any debris blocking filter.
If the filter is lost, the water Pat will not work properly.
Reinstall the hose adapter and tighten it manually and tighten it with a wrench if necessary.
Don\'t tighten too much.
Most hardware stores and WORX sell extra rubber gasket filters.
Re-install if all filters are installed and cleared and all accessories are firmly tightened
Install the long gun and nozzle, change the pressure setting to high and try again.
Keep the water gun from the water source no higher than 5\' to reduce the travel distance between the water and the tools.
There are two working modes for water gun and power nozzle.
First, only short guns and nozzles are used for low pressure operation.
Suitable for light cleaning and watering.
The second is to combine the extended gun with the short gun and the power nozzle for higher pressure applications.
To install the gun on the main body of the hydraulic gun, align the two projections on the gun with the groove of the power nozzle, as shown in the manual.
One side is wider than the other and only works in one way.
Push the gun to the water gun body and rotate counter-clockwise without releasing pressure until the projection on the gun aligns with the projection at the top of the water gun nozzle.
Release once they align.
The same process is used to connect the pressure nozzle.
The groove at the bottom of the side nozzle will be aligned with the groove on the extension gun. Not necessarily.
Different packages contain different items.
To make sure you have received everything, be sure to check your model number in the \"attachment\" chart in the manual.
To connect the garden hose to the hydraulic gun, first turn the hose adapter counter-clockwise and remove the hose adapter under the body and front of the handle shield.
You may need an adjustable wrench to remove it.
Turn this counter carefully. clockwise.
When removing the adapter, be careful not to discard the rubber gasket filter.
Without this piece, the water Pat will not work properly.
Attach the hose fitting to the water gun and pull it gently to ensure its safety.
When removing the hose, be sure not to lose the rubber gasket filter before reinstalling it and it is in place
Connect the hose adapter in clockwise motion.
Do not tighten too much when replacing the hose adapter. Yes!
With a 40 v Share Volt, you can Share the battery and save money.
Your WORX Hydroshot can use any WORX 40 v battery you already have.
By sharing the battery between tools, you will always have the power you need to do any work.
It takes about 8 hours to fully charge the included battery.
Our lithium tools and nickel
The Cd tool is an independent platform and cannot be exchanged.
Lithium batteries provide repair services for our customers
Free technology without managing the inherent memory effects of NiCad batteries.
While Powershare allows you to share the battery between tools of the same voltage series, the battery can only be used with tools of the corresponding voltage.
Use the 40 v max lithium battery with any 40 v WORX tool-even the garden tool-but save 20 v battery for the 20 v tool.
Most WORX tools have security features for your safety to prevent tools from turning on accidentally.
To operate the hydraulic lens, press the black button on the upper handle directly on the opening of the handle (
From the back, the button is on the right).
Press and hold this button to squeeze the trigger handle on/off.
The safety button can be released once the trigger is engaged.
If the handle is released, the security button will automatically-
Prevent accidental operation of water bombs.
Especially since the use
Water source (
Like from a barrel or Lake)
, It may take 20 seconds to start passing water through the hose and the water gun.
Please check the following if still not working :-
Check the connection by gently pulling the hose.
It should not fall off easily.
If so, reinstall by making sure the hose clicks in place. -
Check the air intake filter at the end of the hose to see if debris or dirt is blocking the air intake.
Clean up and reinstall if necessary. -
Confirm that the hose has not been compressed or distorted and that there are no restrictions. -
Make sure the intake filter floats under the water without touching the bottom, any dirt or debris that may prevent the water from entering the hose. -
Unscrew the orange hose adapter from the machine (
This may require an adjustable wrench).
Verify that the rubber gasket filter is still in place and see if there is any debris blocking filter.
If the filter is lost, the water Pat will not work properly.
Reinstall the hose adapter and tighten it manually and tighten it with a wrench if necessary.
Don\'t tighten too much.
Most hardware stores and WORX sell extra rubber gasket filters. -
If the offer is 20ft.
The hose is firmly attached and the equipment does not draw water from your water source, try to connect the home garden hose directly to the machine.
If it works with a direct home connection, rinse the machine for at least 1 minute and reconnect the 20ft provided.
Hose and try to draw water from your water source again. (
This is also a useful step when taking the machine out of storage. )
Re-install if all filters are installed and cleared and all accessories are firmly tightened
Install the long gun and nozzle, change the pressure setting to high and try again.
Keep the water gun from the water source no higher than 5\' to reduce the travel distance between the water and the tools.
Hydroshot is a tool designed for cleaning and watering and should not be used as a toy.
For more information, please refer to the owner\'s manual.
Wear proper safety devices at all times to keep your work space clean and safe.
For more information, please check the owner\'s manual.
Before storing water, run clean, fresh water through the machine.
Remove the battery and let it cool and keep it dry.
Fully drain the water and all the water in the hose with a soft brush and clean cloth, and clean the housing.
Do not use water, solvents or cleaners.
Rinse the hose filter by unscrewing the filter shield counter-clockwise, remove and rinse the filter.
Replace and screw back the filter shield clockwise.
Stored in safe, dry, frosts
A free environment that children cannot access.
You can download the manual here, or our friendly customer service team will be happy to answer you at 1-866-354-9679 (WORX).
If you think WORX Hydroshot is not the right tool for you, we offer 30-
Refund guarantee from date of receipt (
Reduced transport and handling).
Please call our customer service center. 866-354-9679 (WORX)
We are happy to help.
Check out more information here.
We know that your tool is indispensable, so we offer a limited consumer warranty of 2 years for each tool.
You can extend the warranty period to 3 years by registering online within 30 days of purchase.
You already have a water shot? Register now!
Worx batteries are subject to a 1 year limited consumer warranty and do not qualify for an extended warranty.
The tool warranty does not include parts that wear normally.
Check here for more information about our warranty.
Lost hose filter or Shard screen?
Do you need extra batteries?
There are many accessories available online under \"accessories.
Select the items you want to add to your shopping cart, or select Add all to wishlist Regular Price: $176.
81 special price $149
99 join the next project expected by the user of wish listadd wish listworx.
This is because WORX tools is designed to easily cope with every task of the home, yard and workshop.
WORX tools are built on a platform for innovation, power and performance.
They are designed with advanced technology and value, incorporating every modern design, so you can perform it precisely.
WORX makes it easier to get the hardest work done faster.
Buy string trimmer, hair dryer, chain saw, mower, DIY tools, etc. Do it yourself. Do it better.
Do it with WORX.